The individual or luxury home builder does not want to be confined by restrictions of a one metre module system.

We know of no ground plan for a modern house necessitating a module of increments of less than 5 cm.

For the elevations, Styro Stone permits increments down to 2,5 cm.

If your original plans do not conform, your architect will in all likelihood have used a CAD Programme so that your plans can be easily modified at little or no extra cost.

Every Styrostone is line embossed at 5 cm intervals to facilitate the cutting of the blocks to the correct length.

A house designed on the basis of standard stone widths of 25 and 35 cm involves less cutting, thus less labour on site, providing yet another economy.

Styro Stones with EPS-ties allow for a 25 cm space setting at each tie, using end closure 9001 .

For intermediate settings in 5 cm modules, end closure 9002 must be used.

Styro Stones with hard ties always take end closure 9002 , irrespective of the module used.

Rule of thumb:

Every dimension divisible by 25 cm saves time and labour on site.

Every dimension divisible by 5 cm increases time and labour on site.

Any dimension not divisble into modules of 25 cm or 5 cm, appreciably increases time and labour on site.

continue to 일반 정보 - Styro Stones - 듀 포인트 안내